Dell Managed PDU LED Manual do Utilizador Página 160

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 244
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 159
USER’S GUIDE
Managed Rack PDU
155
DNS
Path: Administration > Network > DNS > options
Use the options under DNS to configure and test the Domain Name System (DNS):
Select Primary DNS Server or Secondary DNS Server to specify the IPv4 or IPv6
addresses of the primary and optional secondary DNS server. For the Rack PDU to
send e-mail, you must at least define the IP
address of the primary DNS server.
The Rack PDU waits up to 15 seconds for a response from the primary DNS server
or the secondary DNS server (if a secondary DNS server is specified). If the Rack
PDU does not receive a response within that time, e-mail cannot be sent.
Therefore, use DNS servers on the same segment as the Rack PDU or on a
nearby segment (but not across a wide-area network [WAN]).
After you define the IP addresses of the DNS servers, verify that DNS is working
correctly by entering the DNS name of a computer on your network to look up the
IP address for that computer.
Host Name: After you configure a host name here and a domain name in the
Domain Name field, users can enter a host name in any field in the Rack PDU
interface (except e-mail addresses) that accepts a domain name.
Domain Name (IPv4): You need to configure the domain name here only. In all other
fields in the Rack PDU interface (except e-mail addresses) that accept domain
names, the Rack PDU adds this domain name when only a host name is entered.
To override all instances of the expansion of a specified host name by the addition
of the domain name, set the domain name field to its default, somedomain.com,
or to 0.0.0.0.
To override the expansion of a specific host name entry (for example, when
defining a trap receiver), include a trailing period. The Rack PDU recognizes a host
name with a trailing period (such as mySnmpServer.) as if it were a fully-qualified
domain name and does not append the domain name.
Domain Name (IPv6): Specify the IPv6 domain name here.
Select test to send a DNS query that tests the setup of your DNS servers:
Vista de página 159
1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 243 244

Comentários a estes Manuais

Sem comentários