Dell Managed PDU LED Manual do Utilizador descarregar pdf (Página 10)

USER’S GUIDE

Managed Rack PDU

Establishing Network Settings

You must configure the following TCP/IP settings before the Rack PDU can operate on

a network:

• IP address of the Rack PDU

• Subnet mask

• Default gateway

TCP/IP configuration methods

Use one of the following methods to define the TCP/IP settings needed by the Rack

PDU:

• BOOTP and DHCP configuration

• Command Line Interface

If a default gateway is unavailable, use the IP address of a computer

that is located on the same subnet as the Rack PDU and that is

usually running. The Rack PDU uses the default gateway to test the

network when traffic is very light.

Do not use the loopback address (127.0.0.1) as the default gateway

address for the Rack PDU. It disables the card and requires you to

reset TCP/IP settings to their defaults using a local serial login.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 243 244

Sem comentários

Dell Managed PDU LED Manual do Utilizador Página 10