
Adding and Replacing Parts 173
6
Use your fingertips to carefully spread apart the securing clips on each end
of the memory module connector until the module pops up.
7
Remove the module from the connector.
Replacing the DIMM A Memory Module
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
1
Align the notch in the module edge connector with the tab in the
connector slot.
2
Slide the module firmly into the slot at a 45-degree angle, and rotate the
module down until it clicks into place. If you do not feel the click, remove
the module and reinstall it.
1 memory module cover 2 memory module (DIMM A)
3 memory-module securing clips (2)
book.book Page 173 Tuesday, September 8, 2009 2:01 PM
Comentários a estes Manuais