Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guia do Utilizador descarregar pdf (Página 24)

chassisaction

Description Executes a power action on the chassis or a server.

To use this subcommand, you must have the Chassis

Control Administrator privilege.

Synopsis

racadm chassisaction [-m <module>]

Input

• -m <

module

> — Module on which you want to

carry out the action. Values are:

– chassis - this is the default value, if -m is

not specified.

– switch-n, where n=1

• <

action

> — Action that you want to execute on

the specified module. Values are:

– powerdown — (Chassis only) Turns off

the chassis.

– powerup — (Chassis only) Turns on the

chassis.

– powercycle — Power cycles the module.

– nongraceshutdown — (Chassis only)

Non-gracefully turns off the chassis.

– reset — Performs a hard reset of the

module.

When <

module

> = switch, <

action

> must be powercycle

or reset.

Output None

Example Perform a reset of switch-1:

racadm chassisaction -m switch-1 reset

Module power operation successful.

closessn

Description Closes a communication session on the device. Use the

getssninfo command to view a list of sessions that

can be closed using this command.

To use this subcommand, you must have the Administrator

privilege.

Synopsis

• racadm closessn –i <session id>

• racadm closessn -a

• racadm closessn -u <username>

Input

• -i<

session id

> — The session ID of the session to

be ended, which can be retrieved using RACADM

getssninfo subcommand.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 154 155

Comentários a estes Manuais

Sem comentários

Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guia do Utilizador Página 24

Comentários a estes Manuais

Manuais e produtos relacionados com Software Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX