
26 RAID Configuration and Management
Initializing Physical Disks
New physical disks must be converted to RAID Capable disks before they can
be used. Converting a disk to a RAID Capable disk writes controller
configuration information to the physical disk.
Physical disks with the following statuses can be initialized:
•
Non-RAID
— A physical disk that was configured by a non-PERC S110.
•
Ready
—
Contains no stored data but has PERC S110 configuration
information.
Physical disks that are Online cannot be converted to Non-RAID or RAID
Capable disks.
1
Power-up the system to start booting.
2
When prompted, press the
<Ctrl><R>
keys to access the PERC BIOS
Configuration
Utility.
3
At the
Main Menu
field
u
se the arrow keys to select the
Initialize Physical
Disk(s)
option.
4
Press <Enter>.
5
Use the arrow keys to select
Convert to RAID Capable Disk
or
Convert to
Non-RAID
.
6
Press <Enter>.
7
Use the arrow keys to select a physical disk. Press <Insert> to select the
physical disk, or press the <A> key to choose all selectable physical disks.
NOTE: You can select and initialize multiple physical disks. There is no need
to initialize one physical disk at a time.
8
Press <Enter> to convert selected Physical disk(s) to Non-RAID or
RAID Capable disk(s).
NOTE: After a physical disk is converted to Non-RAID, it appears as Non-
RAID in the Physical Disks field of the PERC S110 BIOS Configuration Utility. A
Non-RAID virtual disk is also created and appears in the Virtual Disks field.
9
A dialog box appears, warning that any data on the physical disk will be
permanently lost if it is initialized. Press the <C> key to continue with
initialization or press <Esc> to cancel.
A5_bk0.book Page 26 Thursday, May 29, 2014 11:37 AM
Comentários a estes Manuais