Dell Networking S6000 Guia de Início Rápido descarregar pdf (Página 16)

12 Hardware Overview

The S6000 supports splitting a single 40G QSFP+ port into 4 x 10G SFP+ ports

using one of the supported breakout cables. When you use the fanout feature, the

40G QSFP+ port is deleted and 4 x 10G SFP+ ports are created.

QSFP+ ports have eight LEDs associated with each stack of two ports; four for

the top and four for the bottom ports. You can configure each port as a single

40G port or 4 x 10G ports. When configured as a 40G port, only the first of the

four LEDs is used. When configured as 4 x 10G ports, all four LEDs are used to

indicate the status.

Table 3-2

lists the LED status.

Table 3-2. 40G QSFP+/ 4x10G SFP+ Ethernet Port LEDs

Table 3-3. Management Ethernet Port LEDs

Feature Detailed Description

Link/Activity LED

• Off – No Link

• Blinking green – Transmit/Receive is active

• Solid green – Link up at 40Gbps/10Gbps speed

Feature Detailed Description

Link LED

• Off – No Link

• Solid green –Link on 10/100M/1G speed

Activity LED

• Off – No Link

• Blinking green – Transmit/Receive is active

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Sem comentários

Dell Networking S6000 Guia de Início Rápido Página 16