Dell Lifecycle Controller 1.3 Manual do Utilizador descarregar pdf (Página 56)

58 USC and USC - LCE

• Broadcom 57710 NetXtreme II 10GigE

Important

• You can configure only one NIC at a time.

• Integrated Broadcom NICs are controlled both by the BIOS and by

settings stored on the device itself. As a result, the

Boot Protocol

field in

the HII of integrated NICs has no effect; this setting is instead controlled

by the BIOS on the

Integrated Devices

screen. To set integrated NICs to

an iSCSI or PXE boot mode, select

System BIOS Settings

, then select

Integrated Devices

. On this screen, you will see a list of each embedded

NIC—select the appropriate value:

Enabled

for no boot capability,

Enabled with PXE

to use the NIC for PXE boot, or

Enabled with iSCSI

to use the NIC to boot from an iSCSI target.

Part Replacement

Part replacement configuration is an automatic update of the firmware for a

new part to the level of the previous part if enabled; the update occurs

automatically when you reboot your system after replacing the part. It is

activated by a license, and can be disabled remotely, as well as through the

USC interface.

Prerequisites

• Part replacement configuration is a licensed feature. Your system should be

equipped with a Dell-licensed vFlash card for this functionality.

•When

Collect System Inventory On Restart

is disabled, the cache of

system inventory information may become stale if new components are

added without manually entering USC after power on.

• The replaced card should belong to the same family as the previous

component.

Supported Devices

The following devices can have part replacement firmware updates:

•NICs (Broadcom)

• PERC, SAS and CERC series 6 and 7

• Power Supply Units

LC1_3.book Page 58 Monday, December 7, 2009 3:14 PM

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 109 110

Comentários a estes Manuais

Sem comentários

Dell Lifecycle Controller 1.3 Manual do Utilizador Página 56

Comentários a estes Manuais

Manuais e produtos relacionados com Servidores Dell Lifecycle Controller 1.3