Dell Force10 S55T Manual de Início Rápido descarregar pdf (Página 10)

8 Installing the Hardware

NOTE: Coat the one-hole lug with an anti-oxidant compound prior to crimping.

Bring any un-plated mating surfaces to a shiny finish, and coat with an anti-oxidant

prior to mating. Plated mating surfaces must be clean and free from contamination.

The S60 is shipped with 2 10-32 screws for attaching a ground cable to the

chassis. The cable itself is not included. Dell Force10 recommends a 6AWG

two-hole lug, #10 hole size, 63" spacing (not included in shipping) to properly

ground the chassis. The two-hole lug must be a UL recognized, crimp-type lug.

Step Task

1 Take the 10-32 screw(s) from the package.

2 Cut cable to desired length. Cable length must facilitate the proper

operation of fault interrupt circuits. Dell Force10 recommends using of

the shortest cable route allowable.

3 Attach the lug to the chassis as shown, using the supplied 10-32

screw(s) with captive internal tooth lock washer. Each screw should be

torqued to 20 in-lbs.

S55

S60

4 Attach the other end of the ground cable to a suitable ground point. The

rack installation ears are not a suitable grounding point.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sem comentários

Dell Force10 S55T Manual de Início Rápido Página 10