Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guia do Utilizador descarregar pdf (Página 288)

IPMI Alert SNMP

LC Log LCD Power Off Power

TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE

is configured correctly.

Response Action

No response action is required.

Category System Health

SubCategory HWC = Hardware Config

Severity Severity 3 (Informational)

Trap/EventID 2331

LCD Message No LCD message display defined.

Initial Default. LC Log

IPMI Alert SNMP

LC Log LCD Power Off Power

TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE

Message An over-temperature event detected on I/O module

The I/O module over heated.

Response Action

Do the following: 1) Make sure fans are installed and working correctly. 2) Check the

temperature sensor status for the chassis and make sure it is within the chassis operating

temperature range. 3) Reseat the I/O module to clear the over-temperature condition. If the

problem persists, contact the service provider.

Category System Health

SubCategory HWC = Hardware Config

Severity Severity 1 (Critical)

Trap/EventID 2329

Sem comentários

Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guia do Utilizador Página 288