Dell R2 Guia de Início Rápido descarregar pdf (Página 8)

6 Getting Started Guide

Configuring Your NAS System

Configuring Your System Using a Keyboard, Monitor, and Mouse

NOTE: Depending on your method of configuration, local keyboard, video, and

mouse (KVM) connections may be required to complete the installation and

configuration procedures. If your remote system can complete the configuration

procedures, local KVM connections are not required for operation.

Connect a keyboard, monitor, and mouse to the NAS system.

For information about system connectors, see your system’s

User’s Guide

Turn on the NAS system.

NOTE: The default administrator user name is administrator

and the default password is storageserver.

Configuring Your System For Network Access

If your NAS system is powered on, turn it off.

Connect one end of an Ethernet cable into one of the 10/100/1000

RJ-45 NIC connectors (see Figure 1-1) on the back of your NAS system.

For more information about the location of system connectors, see

your NAS system’s

User’s Guide

Connect the other end of the Ethernet cable to a functioning Ethernet jack.

Turn on the NAS system.

Verify that the server is connected to the Ethernet by ensuring that the

LED associated with the network interface controller (NIC) connector

is on. See Figure 1-1. If the NIC connector’s LED is a steady green

color, then the connection is good. If the NIC connector’s LED is

a flashing amber color, then data is successfully being transferred.

If the LED is not on, ensure that each end of the Ethernet cable is

seated properly in the NIC connector and the Ethernet jack.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 121 122

Sem comentários

Dell R2 Guia de Início Rápido Página 8