Dell PowerVault TL4000 Instruções de Operação descarregar pdf (Página 23)

Figure 12 Securing the library to the rack

Connecting the SCSI and power cable

NOTE:

The LTO3 tape drive is an Ultra 160 or 320 SCSI LVD device. Only cables and terminators

specified for Ultra160 or 320 use or labeled as Multi Mode should be used.

WARNING!

Approved power cord for your specific geographic region. Use of a non-manufacturer

approved power cord may result in:

1) not meeting individual country specific safety requirements;

2) insufficient conductor amp city that could result in overheating with potential personal

injury and/or property damage;

3) an unapproved power cord could fracture resulting in the internal contacts being exposed,

which potentially could subject the user to a shock hazard. Manufacturer disclaims all liability

in the event a non-manufacturer approved power cord is used.

CAUTION:

Failure to remove the power cables from these devices could result in damage to the

library.

To connect the SCSI and power cable to the tape library:

1. Shut down and turn off the selected server. Turn off all attached devices, such as printers and other SCSI

devices. Remove the power cables from the server and all attached accessories.

2. Attach one end of the SCSI cable (included in the accessory package) to one of the connectors

on the back panel of the library (see Figure 13).

Figure 13 Attaching the SCSI cable to the LTO3 full height drive

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

Sem comentários

Dell PowerVault TL4000 Instruções de Operação Página 23