Dell PowerVault TL4000 Instruções de Operação descarregar pdf (Página 19)

4. Lift the library out of the carton and remove the bag from the library. Remove the foam

cushion from the back of the library. Save the packaging materials for future use.

CAUTION: Do not place the library on either end or sides as this may damage the library.

Identifying product components

Confirm that you have received the following:

 Library

 Terminator

 SCSI cable

 Rack mount kit:

• 2 rack mount rails

• 1 bag of nine M6 screws for the Rack (9.5 mm square holes in the rack column)

• 1 bag of nine M6 screws for rack mounting (6.85 mm)

• 2 mounting brackets

• 4 M3x6 Torx screws to fix the mounting brackets

• 1 T10 Torx screwdriver

• 2 guide pulleys

• 2 M3x8 Torx screws to fix the guide pulleys

• 2 M5 screws to secure the mounting brackets to the rack

 Documentation CD

1. Quick Start Guide

Removing the shipping lock

IMPORTANT:

The shipping lock, which prevents the robotic transport mechanism from moving

during shipment, must now be removed before the library is powered on.

The shipping lock is held in place with a label and is located in the top center of the library. After the

shipping lock is removed, it should be stored on the rear panel right side of the library for future use.

To remove and store the shipping lock:

5. Remove the yellow label that is securing the lock to the top of the library, and then remove the

lock (see Figure 6).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 79 80

Sem comentários

Dell PowerVault TL4000 Instruções de Operação Página 19