Dell Chassis Management Controller Version 4.3 Guia de Resolução de Problemas

Dell Chassis Management Controller Firmware Version 4.3Troubleshooting Guide

– CMC Web interface: Go to Chassis Overview → Troubleshooting → Reset components . In the Reset column, select iDRAC Reset option.NOTE: Do not select

Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates

IntroductionThe Dell Chassis Management Controller Firmware Version 4.3 Troubleshooting Guide provides solutions for few issues you may see while usin

If the prompt indicates a self test failure, there are no serviceable components on CMC. Then, replace the CMC card.If the prompt indicates Bad Firmwa

* CMC Web Interface: Go to Chassis Overview → Logs to view the CMC logs.* RACADM: Use the getsel, getraclog or gettracelog commands.Check if the PSU c

– RACADM: Use the getsel, getraclog, or gettracelog commands.3. If the problem persists, reset CMC to factory default settings.NOTE: This command comp

Modular Server in the Chassis is Not Accessible1. Make sure that the modular server is in powered ON state. To check the modular server condition, log

Fabric MismatchThe first modular server or IOM inserted in the chassis decides the uniformity and sequence of a Fabric type. Fabric mismatch is notice

NOTE: When power supply redundancy is enabled, a PSU in the chassis is utilized as a spare, ensuring that the failure of any one PSU does not cause th