
IRQ Assignments
Default Dell-Installed Expansion Card Placement
Table 1 provides the default Dell-installed expansion card placements if a system is ordered with a TV tuner card. Table 2 provides the default
Dell-installed expansion card placements if a system is ordered without a TV tuner card.
Table 1. Default Dell-Installed Expansion Card Placements for Systems with Optional TV Tuner Card or SwapBox
20% to 80% (noncondensing)
0.25 G at 3 to 200 Hz at 1/2 octave/min
0.5 G at 3 to 200 Hz at 1/2 octave/min
left side (for mini tower orientation) and bottom half-sine pulse with a change in
velocity of 50.8 cm (20 inches)/sec
23-G faired-square wave with a velocity change of 508.0 cm (200 inches)/sec
–16 to 3048 m* (–50 to 10,000 ft)
–16 to 10,600 m (–50 to 35,000 ft)
* At35°C(95°F),themaximumoperatingaltitudeis914m(3000ft).
NOM O24 Information (Mexico only)
Enables IRQ8 through IRQ15
Diskette/tape drive controller
1
IRQ3 is available provided that no other device in the computer (such as a modem) is using COM2 or COM4.
2
IRQ9 is available to PCI cards only.
3
The PCI IRQ is assigned to an available IRQ line after an ISA expansion card has been configured. If an ISA expansion card is configured
for IRQ11, the PCI IRQ is assigned to another available IRQ line.
Comentários a estes Manuais