Dell Studio XPS 435T / 9000 (Early 2009) Manual do Utilizador

DellStudioXPS™435T/9000ServiceManual Notes, Cautions, and Warnings Information in this document is subject to change without notice. ©2009Del

Back to Contents Page  Replacing the Processor DellStudioXPS™435T/9000ServiceManual    1. Follow the procedures in Before You Begin. 

 9. If the release lever on the socket is not fully extended, move it to that position.    10. Orient the front and back alignment-notches on

Back to Contents Page 

Back to Contents Page  Replacing Drives DellStudioXPS™435T/9000ServiceManual Replacing the Hard Drive Replacing the Optical Drive Rep

 5. Slide the drive out towards the back of the computer.  6. To replace the hard drive, check the documentation for the drive to verify that it

 9. Insert the optical drive into the chassis and slide it into place.  10. Align the screw holes in the optical drive with the screw holes

 7. If you are not replacing the Media Card Reader go to step 12.  8. If you are replacing the Media Card Reader or installing a new one, slide t

 8. If you are not replacing the FlexDock, replace the metal filler if applicable (see Replacing the Metal Filler) and proceed with step 15.  9

 6. Push the tabs to lock the FlexDock drive insert. Replacing the Metal Filler   1. Follow the procedures in Before You Begin.  2. Rem

 5. To replace the metal filler, align the metal filler along the edges of the empty slot of the FlexDock or an optical drive and push the metal fill

Back to Contents Page  Replacing the Badge Back Light DellStudioXPS™435T/9000ServiceManual   1. Follow the procedures in Before You Begin.

Back to Contents Page  Replacing Fans DellStudioXPS™435T/9000ServiceManual Replacing the Chassis Fan Replacing the Processor Fan and Hea

   1. Follow the procedures in Before You Begin.  2. Remove the computer cover (see Replacing the Computer Cover).  3. Disconnect the proce

 11. Connect the processor fan and heat sink assembly cable to the connector (CPUFAN1) on the system board (see System Board Components).  12. Re

Back to Contents Page  Replacing the Front Panel DellStudioXPS™435T/9000ServiceManual   1. Follow the procedures in Before You Begin. 

Back to Contents Page  Replacing Memory Module(s) DellStudioXPS™435T/9000ServiceManual   1. Follow the procedures in Before You Begin. 

  8. Insert the module into the connector until the module snaps into position. If you insert the module correctly, the securing clips snap in

Back to Contents Page  Replacing the Power Supply DellStudioXPS™435T/9000ServiceManual     1. Follow the procedures in Before You Begin.

 8. Reconnect the DC power cables to the system board and drives.  9. Replace the computer cover (see Replacing the Computer Cover).  10. Conn

Back to Contents Page  Replacing the System Board DellStudioXPS™435T/9000ServiceManual    1. Follow the procedures in Before You Begin.

 9. Remove the nine screws that secure the system board to the chassis.  10. Lift the system board up and out.   11. Orient the new or repla

Back to Contents Page  Before You Begin DellStudioXPS™435T/9000ServiceManual Technical Specifications Recommended Tools Turning Off Y

Back to Contents Page  System Setup DellStudioXPS™435T/9000ServiceManual Overview Clearing Forgotten Passwords Clearing CMOS Settings

Memory Installed Indicates the amount of installed memory in MB. Memory Available Indicates the amount of memory available in MB. Memory Technology In

 Boot Sequence This feature allows you to change the boot sequence for devices.  Boot Options l Hard Drive — The computer attempts to boot from th

Changing Boot Sequence for Future Boots  1. Enter system setup (see Entering System Setup).  2. Use the arrow keys to highlight the Boot Device

 2. Remove the computer cover (see Replacing the Computer Cover).  3. Locate the 3-pin CMOS connector (CLR_CMOS) on the system board (see Syste

The file icon appears on your desktop and is titled the same as the download BIOS update file.  8. Double-click the file icon on the desktop and foll

Back to Contents Page  Technical Overview DellStudioXPS™435T/9000ServiceManual Inside View of Your Computer System Board Components 

Back to Contents Page  1 processor socket (CPU) 2 memory module connector (DIMM2) 3 processor fan connector (CPUFAN1) 4 memory module connector (DI

Back to Contents Page DellStudioXPS™435T/9000ServiceManual Information in this document is subject to change without notice. ©2009DellInc.

Back to Contents Page  Replacing the Top Cover DellStudioXPS™435T/9000ServiceManual   1. Follow the procedures in Before You Begin.  2

 1. Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.  2. Turn off your computer (see Turning Of

8. Remove the I/O panel (see Replacing the I/O Panel).  9. Set the computer top cover aside in a secure location.  10. To replace the top cove

Back to Contents Page  Replacing the I/O Panel DellStudioXPS™435T/9000ServiceManual   1. Follow the procedures in Before You Begin.  2

Back to Contents Page  Replacing a PCI Express Card DellStudioXPS™435T/9000ServiceManual Configuring Your Computer After Removing or Instal

 6. For a PCI card, grasp the card by its top corners, and then ease it out of its connector.  7. For a PCI Express x16 card, push the securing t

 14. Press and push the tabs of the PCI support bracket until its clicks into the filler brackets.  15. Press the tabs and push the expansion ca

Back to Contents Page  Replacing the Battery DellStudioXPS™435T/9000ServiceManual    1. Record all the screens in system setup (see Syste

Back to Contents Page  Replacing the Computer Cover DellStudioXPS™435T/9000ServiceManual     1. Follow the procedures in Before You Begi