Dell PowerVault TL1000 Manual do Utilizador descarregar pdf (Página 158)

Table C-4. Ultrium Tape drive sense data - Bytes 12 and 13 (continued)

Byte 12 ASC Byte 13 ASCQ Description

30 0D Medium Error - WORM integrity check. The drive rejected a Read or Write

operation because the cartridge is a suspicious WORM cartridge.

31 00 Media format corrupted - Data could not be read because the format on tape is not

valid, but is a known format. A failure occurred attempting to write the FID.

37 00 Rounded parameter - A Mode Select command parameter has been rounded

because the drive can not store it with the accuracy of the command.

3A 00 Media Not Present - A media access command has been received when there is no

cartridge loaded.

3B 00 Sequential Positioning Error - A command has failed and left the logical position at

an unexpected location.

3D 00 Invalid bits in identify Message - An illegal Identify Message has been received at

the drive at the start of a command.

3E 00 Logical Unit has not Self-Configured - The drive has just powered on and has not

completed its self test sequence and can not process commands.

3F 01 Code Download - The firmware in the drive has just been changed by a Write

Buffer command.

40 xx Diagnostic failure - A diagnostic test has failed. The xx (ASCQ) is a vendor specific

code indicating the failing component.

43 00 Message Error - A message could not be sent or received due to excessive

transmission errors.

44 00 Internal target failure - A hardware failure has been detected in the drive that has

caused the command to fail.

45 00 Select/Reset Failure - An attempt to reselect an initiator in order to complete the

command has failed.

4B 00 Data Phase Error - A command could not be completed because too many parity

errors occurred during the Data phase.

4E 00 Overlapped Commands - An initiator selected the drive even though it already

had a command outstanding in the drive.

50 00 Write Append Error - A write type command failed because the point at which to

append data was unreadable.

51 00 Erase failure - An Erase command failed to erase the required area on the media.

52 00 Cartridge fault - A command could not be completed due to a fault in the tape

cartridge.

53 00 Media Load/Eject Failed - (Sense Key 03) An attempt to load or eject the cartridge

failed due to a problem with the cartridge.

53 00 Media Load/Eject Failed - (Sense Key 04) An attempt to load or eject the cartridge

failed due to a problem with the drive.

53 02 Media Removal Prevented - An Unload command has failed to eject the cartridge

because media removal has been prevented.

5D 00 Failure Prediction Threshold - Failure Prediction thresholds have been exceeded

indicating that a failure may occur soon.

5D FF Failure Prediction False - A Mode Select command has been used to test for Failure

Prediction system.

82 82 Drive requires cleaning - The drive has detected that a cleaning operation is

required to maintain good operation.

82 83 Bad Code Detected - The data transferred to the drive during a firmware upgrade

is corrupt or incompatible with drive hardware.

C-6 Dell PowerVault TL1000 Tape Autoloader User's Guide

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 193 194

Comentários a estes Manuais

Sem comentários

Dell PowerVault TL1000 Manual do Utilizador Página 158

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Dell PowerVault TL1000