Dell PowerVault 160T LTO2 (Tape Library) Manual do Utilizador descarregar pdf (Página 61)

Maintaining Your Library: Dell PowerVault 160T Tape Library User's Guide

file:///C|/Users/greshma_dhanarajan/Desktop/ug/maintain.htm[5/16/2013 10:08:21 AM]

Port Mode Target or Initiator

Status Operational, Lost Sync

WWPN World Wide Port Name

Loop ID If connection is arbitrated loop, the loop ID

Connection Loop, Point to Point, Loop Preferred, Point to Point Preferred

Speed 1 Gb/s, 2 Gb/s, or Auto

Monitoring I/E Station Status

Use the Monitor—> I/E Station command to display detailed information about the I/E stations in the currently selected

partition. If you are working in the physical library, status information for all I/E stations is displayed.

1. If you have created a partition, use the View menu to select the appropriate library or partition. To find out how to do

so, refer to Selecting a Library or Partition

2. Select Monitor—> I/E Station or use the I/E toolbar button.

The I/E Station Status dialog box is displayed.

You can view the following for each I/E station: the I/E station number, magazine number, media ID, and slot

type. Table 6

explains the information that the dialog box displays.

Table 6. Monitor—> I/E Station Dialog Box Output

Table Label Definition

I/E Station

number

The I/E station number is the same as the control module or expansion module that

contains it.

Magazine number I/E station magazines are numbered from top to bottom.

Media ID The I/E station barcode.

Slot Type Media type, for example, LTO.

Recording the Information in the Display

1. Select Send at the bottom of the I/E Station Status dialog box.

The Email, Save, or Print Table dialog box is displayed.

2. Do one of the following:

Enter the e-mail address for a recipient into the text box after Email, then select OK.

NOTE: If you have not previously configured e-mail settings, go to Configuring E-mail Settings. Then

return to this section.

Enter a filename into the text box after the Save option. Use the file browser to save to a location different from

the default. The default location is \SNC Manager\app\Client.

Select Print.

NOTE: You can e-mail, save, and print from a remote client. You can only e-mail from the local client.

3. Select OK to send.

Monitoring Slot Status

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 89 90

Sem comentários

Dell PowerVault 160T LTO2 (Tape Library) Manual do Utilizador Página 61