Dell W-IAP103 Guia do Utilizador descarregar pdf (Página 11)

100

101

Specifying Addresses and Identifiers in Commands

This section describes addresses and other identifiers that you can reference in CLI commands.

Address/Identifier Description

IP address For any command that requires entry of an IP address to specify a network entity,

use IPv4 network address format in the conventional dotted decimal notation (for

example, 192.0.2.1).

Netmask address For subnet addresses, specify a subnet mask in dotted decimal notation (for

example, 255.255.255.0).

Media Access Control

(MAC) address

For any command that requires entry of a device’s hardware address, use the

hexadecimal format (for example, 00:05:4e:50:14:aa).

Service Set Identifier

(SSID)

A unique character string (sometimes referred to as a network name), consisting

of no more than 32 characters. The SSID is case-sensitive (for example, WLAN-

01).

Basic Service Set

Identifier (BSSID)

This entry is the unique hard-wireless MAC address of the AP. A unique BSSID

applies to each frequency— 802.11a and 802.11g—used from the AP. Use the

same format as for a MAC address.

Extended Service Set

Identifier (ESSID)

Typically the unique logical name of a wireless network. If the ESSID includes

spaces, enclose the name in quotation marks.

Table 7:

Addresses and Identifiers

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide Instant CLI | 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 575 576

Comentários a estes Manuais

Sem comentários

Dell W-IAP103 Guia do Utilizador Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Pontos de acesso WLAN Dell W-IAP103