Dell PowerConnect W Clearpass 100 Software Guia do Utilizador descarregar pdf (Página 236)

236236 | OmniVista 3600Integration and Man-

agement

Dell PowerConnect W-Series Aruba Instant 6.2.1.0-3.3 | User Guide

the DHCP clients information about certain services such as PXE. In such an environment, the standard DHCP

options 60 and 43 cannot be used for Alcatel-Lucent APs.

This method describes how to set up a DHCP server to send option 43 with OmniVista 3600 information to Alcatel-

LucentAOS-W InstantOAW-IAP. This section assumes that option 43 is sent per scope, because option 60 is being

shared by other devices as well.

The DHCP scope must be specific to Instant, and the PXE devices that use options 60 and 43 must not

connect to the subnet defined by this scope. This is because you can specify only one option 43 for a

scope, and if other devices that use option 43 connect to this subnet, they are presented with Instant-

specific information.

1. In server 2008, navigate to Server Manager > Roles > DHCP Server > Domain DHCP Server > IPv4.

2. Select a scope (subnet). Scope (10.169.145.0)145 is selected in the example shown in the figure below.

3. Right-click and select Advanced, and then specify the following options:

n Vendor class— DHCP Standard Options

n User class— Default User Class

n Available options— Select 043 Vendor-Specific Info

n String Value— Alcatel-LucentInstantAP, tme-store4, 10.169.240.8, Alcatel-Lucent123 (which is the AP

description, organization string, OmniVista 3600 IP address, Pre-shared key for OmniVista 3600)

Figure 83 Vendor Specific DHCP options

Upon completion, the OAW-IAP shows up as a new device in OmniVista 3600, and a new group called tme-store4

is created. Navigate to APs/Devices > New > Group to view this group.

1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 295 296

Sem comentários

Dell PowerConnect W Clearpass 100 Software Guia do Utilizador Página 236