Dell Networking S6000 System Guia de Instalação descarregar pdf (Página 24)

24 | Install the S6000

www.dell.com | support.dell.com

Configuring a Two-Post Flush-Mount

Step Task

1 For this configuration, remove the castings from the front side of each ReadyRails assembly. Refer to

Figure 4-2

item 1. To remove the two screws from each front flange ear (on the switch side of the rail) and remove each

casting, use a Torx driver. Retain the castings for future rack requirements. It is not necessary to remove the rear

flange castings.

Figure 4-2. Two-Post Flush-Mount Configuration

2 Attach one rail to the front post flange with two user-supplied screws. Refer to

Figure 4-2

, item 2.

3 Slide the plunger bracket forward against the vertical post and secure the plunger bracket to the post flange with

two user-supplied screws. Refer to

Figure 4-2

, item 3.

4 Repeat this procedure for the second rail.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Sem comentários

Dell Networking S6000 System Guia de Instalação Página 24