Dell 3348 - PowerConnect Switch - Stackable Informações Técnicas descarregar pdf (Página 14)

14 System Information Guide

www.dell.com | support.dell.com

Set the Master unit to Unit ID 1 during the boot process by toggling the Unit ID selector

button. The stack Member units should also be assigned a unique Unit ID between 2 and 6

during the boot process. Setting the unique IDs establishes a stack of switches that you can

manage through the Master unit.

Connecting the Console Port

The switch provides an RS-232 serial port that enables a connection to a desktop system or

terminal for monitoring and configuring the switch. This port is a male DB-9 connector,

implemented as a data terminal equipment (DTE) connection.

To use the console port, you need the following equipment:

• A terminal or TTY-compatible terminal, or a desktop or portable system with a serial

port and the capability to emulate a terminal

• A null modem or crossover RS-232 cable with a female DB-9 connector for the console

port on the switch

To connect a terminal to the console port:

1 Connect the female connector of the RS-232 cable directly to the console port on the

switch, and tighten the captive retaining screws.

2 Connect the other end of the cable to a terminal or the serial connector of a desktop

system running terminal emulation software.

Ensure that the terminal emulation software is set as follows:

a Select the appropriate serial port (serial port 1 or serial port 2).

b Set the data rate for your switch type.

Select 115200 baud for 33xx switches, or select 9600 baud for all other switches.

c Set the data format to 8 data bits, 1 stop bit, and no parity.

d Set flow control to none.

e Under Properties, select VT100 for Emulation mode.

f Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that the setting is

for Terminal keys (not Windows keys).

NOTICE: When using HyperTerminal with Microsoft

Windows

2000, ensure that you have

Windows 2000 Service Pack 2 or later installed. With Windows 2000 Service Pack 2, the

arrow keys function properly in HyperTerminal’s VT100 emulation. Go to www.microsoft.com

for information on Windows 2000 service packs.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 46 47

Sem comentários

Dell 3348 - PowerConnect Switch - Stackable Informações Técnicas Página 14