Back to Contents Page
Subwoofer
DellPrecision™M90MobileWorkstationServiceManual
If you ordered a subwoofer with your computer, it is already installed. To remove and replace a subwoofer:
1. Follow the instructions in Before Working Inside Your Computer.
2. Remove the optical drive (see Optical Drive).
3. Remove the hinge cover (see Removing the Hinge Cover).
4. Remove the keyboard (see Keyboard).
5. Remove the display assembly (see Removing the Display Assembly).
6. Remove the palm rest (see Removing the Palm Rest).
7. Loosen the two captive screws that secure the subwoofer in place.
8. Disconnect the subwoofer cable connector from the connector on the system board.
Back to Contents Page
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, you must remove the main battery (see Before Working Inside Your Computer) before you
begin working inside the computer.
Comentários a estes Manuais